REMOVING THE SELF-CLEANING PANELS
If the
FO 0145
Allow the oven to cool down, remove the drop collecting basin, and unscrew the ring nuts of the shelf supports.
FO 0085
Remove the side panels.
FO 0028
If necessary, unscrew the fixing screw of the back panel and remove it. Once the cleaning is carried out, refit the parts following these instructions backwards.
THE HINGED GRILL
This model has been fitted with a hinged grill element, to enable you to clean the roof of the oven easily. Before proceeding, ensure the oven is isolated from the electricity supply. Then undo the screw which holds the grill in place. (see Fig. 8)
Gently pull the grill downward to allow access to the oven roof. (see Fig. 9).
Clean the oven roof with a suitable cleaner and wipe dry before replacing the hinged grill element.
Gently push up the grill element into place and firmly screw into place the holding nut.
NOTE: Ensure the grill holding nut is firmly in place to avoid the grill falling down during operation.
FO 0781 |
Fig. 8
FO 0778 |
Fig. 9
60