Securing the Oven to the Cabinet
Fit the appliance into the cabinet recess.
Open teh oven door and secure the oven to the kitchen cabinet with four wood screws, which fit the holes provided in the oven frame (Fig.
When installing an electric plate hob over the oven, the hob's electrical connection and the oven's one have to be carried out separately, for security reasons and to let the oven be taken off the unit easier, if necessary.
Electric Connection
Before the appliance is connected:
☞1) check that the main fuse and the domestic installation can support the load;
2)check that the power supply is properly earthed in compliance with the current rules;
3)check the socket or the double pole switch used for the electrical connection can be easily reached with the appliance built in the forniture unit.
This appliance is supplied without connection cable . A suitable one must be fitted to the appliance and a proper plug, able to carry the load specified on the rating plate, must be fitted on the connection cable. The connection cable must be a
—H07
—H05
—H07
—H05
The plug has to be fitted in a proper socket.
If connecting the appliance directly to the electric system, a double pole switch must be installed between the appliance and the electricity supply, with a minimum gap of 3 mm. between the switch contacts and of a type suitable for the required load in compliance with the current rules. The earth wire must not be interrupted by the double switch pole.
The connection cable has to be placed in order that, in each part, it cannot reach a temperature 50 °C higher than the room temperature.
After the connection is carried out, test the heating elements for about 3 minutes.
Terminal block
The oven has an easily accessible terminal block, which is meant to work with an electric
(Fig. 25)
The manufacturer disclaims any responsability should all the safety measures not be carried out.
FO 0039
Fig. 23
FO 0986
Fig. 24
FO 0279
Fig. 25
79
