If you turn the oven knob to a cooking function while the pyrolytic function is active, the cleaning cycle will be interrupted.
If the oven door lock is activated, it is impossible to select any cooking until the door lock is off.
To programme the pyrolytic cleaning cycle (delayed start, automatic stop)
If you wish, you can programme the starting and ending time of the pyrolytic cleaning cycle.
1.Turn the oven knob to position 
. The “Cook Time” indicator and the PYr I indication will flash in the dis- play (Fig. 22).
2.Press “Pyrolytic” button to activate the pyrolytic cleaning function. The temperature indicators will start lightning alternatively. This means that the oven is rapidly heating up.
The“PYr I” indication will stop flashing, the oven light goes out and the pyrolytic cleaning cycle starts (Fig. 24).
If the oven cavity is very dirty, we advise you to select the pyrolytic 2 function (PYr 2) on the programmer display.
1.Press “Pyrolytic” button to select the pyrolytic 2 (PYr 2) function.
2.Press button “Time” twice to display the end time of the cleaning cycle. After the setting is carried out, the “Cook Time” and “End Time” indicators will light permanently.
3.Turn the time/temperature control knob to 
to select the the end time of the cleaning cycle.
The pyrolytic cleaning cycle will start according to the programmed time. The temperature level indicators will light up alternatively. This means that the oven is rapidly heating up.
After some time, the temperature level indicators will light permanently in the display. This means that the oven door has been locked.
At the end of the pyrolitic cleaning process, “0.00” will flash in the display.
Once the oven has cooled down (check the temperature level indicators coming off one by one), the oven door will unlock.
To reset the oven, turn the oven function control knob to the “OFF” position (0).
If you press a button other than the knob, the alarm will switch off and the display will show
To reset the oven, turn the oven function control knob to the “OFF” position (0).
To stop the pyrolytic cleaning cycle at any time, turn the oven function control knob to the “OFF” position (0).
24
