Clean the oven door glass with warm water and a soft cloth only. Never use harsh abrasives as they could damage the special
The two glasses in the middle are special glasses that have been treated to resist heat. They are marked with a small dot located on a corner and a black frame respectively.
It is important that, when refitting the oven door, the inner glasses are fixed in the right position.
To check if this operation has been carried out correctly, when inserting the glass, make sure that the surface of the glass marked with a black frame looks downwards and that the dot is located on the upper left corner of the glass (see diagram 7).
DO NOT clean the oven door while the glass panels are warm. If this precaution is not observed the glass panels may shatter.
If the door glass panels become chipped or have deep scratches, the glasses will be weakened and must be replaced to prevent the possibility of the panel shattering. Contact your local Service Force Centre who will be pleased to advise further.
Oven lamp replacement
Disconnect the appliance from the electricity supply.
If the oven bulb needs replacing, it must comply with the following specifications: electric power, 40 W; electric rate, 230 V (50 Hz); resistant to temperatures of 300°C; connection type: E14. These bulbs are available from your local Service Force Centre.
To replace the faulty bulb:
1.Ensure the oven is disconnected from the electrical supply.
2.Turn the glass cover anticlockwise.
3.Remove the faulty bulb and replace it with the new one.
4.Refit the glass cover.
5.Reconnect to the electrical supply.
7. |
26
