If there are other fuel burning appliances in the same room, B.S. 5440: Part. 2: Current Editions should be consulted to determine the requisite air vent requirements.

Location

The cooker may be located in a kitchen, a kitchen/diner or bedsitting room but not in a bathroom, shower room or garage.

For information regarding the fitting of flexible supply pipes, the highest temperature at the rear of this cooker which may come into contact with the supply pipe is 70°C above ambient.

When the appliance has been installed there must be enough space fot the hotplate lid (when present) to open fully.

Positioning the Cooker

Caution:

Some soft or badly fitted floor coverings can be damaged when the cooker is moved across their surface for cleaning. It is advisable to ensure that the floor covering in the area below the cooker is either securely fixed so as not to ruck up when the cooker is moved or, if preferred, removed.

Installation

 

 

D

 

 

C

 

780

E

115

420

 

 

 

 

B

 

 

 

 

A

 

FO 1141

 

 

 

Dimensions are given in millimeters

Fig. 1

The appliance must be installed in accordance to the type X (standard EN 60335-2-6).

Therefore the appliance cannot be installed beside furniture higher than the cooker worktop.

This cooker must only be installed by qualified personnel, according to the manufacturer’s instructions and to the relevant British Standards.

1. PositioningtheAppliance (Fig. 1)

Note A:

The appliance is designed to be flush fitted with 2mm clearance at each side to allow for it to be pulled forward for cleaning etc.

Note B:

The hotplate side trims should be flush with the cabinets and must not be below. Adjustable levelling feet at the front and rear are provided on the base of the appliance. Adjustment is obtained by rotating in or out, the feet at the front or rear of the appliance from the underside of the appliance, with the drawer removed.

A spirit level should be placed on a cake tray on one of the shelves to confirm that the appliance is correctly levelled.

The levelling feet fitted to the appliance will achieve a height to hotplate trims of 900mm-0 + 10.

Note C:

If the appliance is fitted next to a side wall or cabinets above height of the hotplate trims, then a gap of 115 mm is required.

Curtains must not be fitted immediately behind the cooker or within 115 mm of the sides of the cooker.

Note D:

Any wall cabinet or extractor must not be lower than 780mm above hotplate level.

Note E:

Wall cabinets may be fitted in line with the sides of the base units, providing that the lower edge of the wall cabinet is a minimum of 420mm above the worktop.

20

Page 19 Page 21
Page 20
Image 20
Zanussi ZCM 631 manual Location, Positioning the Cooker, PositioningtheAppliance Fig
Page 19 Page 21

ZCM 631 specifications

The Zanussi ZCM 631 is a versatile and efficient cooking appliance that perfectly balances performance and style for your kitchen. Renowned for its practical features and advanced technologies, this gas cooker is ideal for both budding home cooks and experienced chefs alike.

One of the standout features of the ZCM 631 is its powerful gas hob, which comes equipped with four burners of varying sizes. This allows for maximum flexibility when preparing meals, accommodating everything from small saucepans to larger pots for boiling or stewing. The burners are designed for efficient heat distribution, ensuring that your food cooks evenly and quickly. The inclusion of a heavy-duty cast iron pan support not only adds strength and stability but also provides a professional look to the cooker.

Another impressive aspect of the Zanussi ZCM 631 is its integrated oven, which offers a spacious capacity that can handle a variety of dishes, from roasts to baked goods. The oven features a fan-assisted cooking system, ensuring even heat distribution throughout the cavity to achieve consistently excellent results. Whether you're baking a delicate soufflé or roasting a joint of meat, the ZCM 631 provides the perfect environment for all your culinary creations.

Ease of use is a priority in the design of the ZCM 631. The appliance includes user-friendly controls that are straightforward and intuitive, allowing you to adjust temperatures and settings effortlessly. Additionally, the automatic ignition feature ensures that lighting the burners is a breeze, eliminating the need for matches or lighters.

Cleaning is made easy with this model, thanks to its enamel-coated surfaces which are resistant to stains and easy to wipe down. The oven door is also designed for easy removal, allowing for convenient access when it comes to deep cleaning.

In terms of safety, the Zanussi ZCM 631 is equipped with flame failure devices that automatically cut off the gas supply if the flame goes out, providing peace of mind while cooking.

With its stylish design, practical features, and innovative technologies, the Zanussi ZCM 631 is a fantastic addition to any kitchen, making it easier than ever to create delicious meals with confidence. Whether you’re a fan of traditional cooking methods or looking to modernize your culinary skills, the ZCM 631 offers everything you need to explore and enhance your cooking experience.
Top Page Image Contents