Zanussi ZCM 631 hour Clock and Timer, Cookpot, symbol, Auto, Programming, controls, Time setting

24 hour Clock and Timer

Minute minder			Cookpot
			symbol
Cooking duration
End of cooking time	Auto
			U
			A
Manual function	symbol		T
			O
		TIMER
Cookpot symbol - This will be displayed when a
program is in operation.

AAuto symbol - This will be displayed when the

U	oven has been programmed for automatic
T	operation.
O		Programming
	Time setting knob - Turn it clockwise and hold it in
		controls
	the turned position to increase the time setting.
	Turn it anticlockwise and hold it in the turned
	position to decrease the time setting. The count-
	up or count-down speed increases the longer the
	knob is held in the turned position.

The electronic timer can indicate the time of day, operate as a minute minder and automatically operate the oven. Before the oven can be operated, the time of day must

be set on the electronic timer.TIMER Please note that this is a 24 hour clock. For example,

2pm is shown as 14:00.

In case of loss of power, all the settings (time of day, set program or program in operation), will be cancelled. When the power is restored, the numbers on the display will flash, and the timer has to be reset.

ΦTO SET THE TIME OF DAY

Press button , release the button, then turn the time setting knob until the correct time of day is displayed.

TIMER

ΦTO SET THE MINUTE MINDER

Press button, release the button, then turn the setting

time knob until the duration time is displayed (maximum 23 hours, 59 minutes).

Our diagram shows the timer set for 45 minutes. After a few seconds the time of day will show in the display.

To check the number of minutes remaining, press the button. At the end of the timed period an alarm will sound. To switch off the alarm press button .

Time setting

7