300 mm.

 

 

WALL FACE

 

 

 

 

 

 

 

BACK OF COOKER

580 mm.

mm.

 

 

ENGAGEMENT EDGE FOR

LEVELLING FEET

 

STABILITY BRACKET

 

100

 

 

 

 

 

 

 

 

A

BASE OF COOKER

 

 

 

 

 

PENCIL LINE ON THE FLOOR

 

 

 

 

 

295 mm.

 

 

 

PLAN VIEW OF THE COOKER

 

SIDE VIEW

FO 0179

 

OF THE COOKER

 

 

 

 

Fig. 2

 

Dimensions are given in millimeters

Fitting the Stability Bracket (Not supplied)

If the cooker has to be installed with a flexible supply pipe, it is necessary that a stability device is fitted. (See safety Requirements: Page 19).

If a stability bracket is to be fitted by the installer, these instructions should be read in conjunction with the leaflet packed with the stability bracket.

Place cooker in its intended position and level cooker.

Mark off 295 mm (11 1/2") from the right hand side of the cooker as shown, this is the centre line of the bracket fixing.

Draw a line 100mm (4") from the front edge of the levelling feet (see Fig. 2) and remove cooker from its position. Mark off 580mm (23") back from this line on the centre line of the bracket to locate the front edge of the lower bracket.

Connecting to Gas

This cooker is designed to be installed with an appliance flexible connection. Connection is made to the RC 1/2 (1/2" B.S.P.) threaded entry pipe located just below the hotplate level on the rear right-hand side of the cooker. Check for gas soundness after connecting the gas supply.

The gas bayonet connector must be fitted in the shaded area indicated in the diagram. Take into account that it must be possible to pull the cooker forward sufficiently. The hose must not get caught on the stability bracket.

Note:

For certain types of gas bayonet connection used, it may not be possible for the appliance to be pushed fully back to the wall stops.

Important:

Flexible tubing MUST comply with BS.669 Current Edition.

Fix lower bracket (with two fixing holes) to the floor, then measure height from floor level to engagement edge on back of cooker, dimension 'A' of Fig. 2.

Assemble upper bracket to lower bracket so that underside of bracket is dimension 'A' +3mm (1/8") above floor level. Re-position cooker and check that top bracket engages into cooker back to a depth of 75mm (3"), as shown in Fig. 2.

Should the stability bracket currently installed not allow the cooker to stand correctly, ask the installer to replace it with the correct type.

 

600

450

 

130

 

FO 2435

Fig. 3

Dimensions are given in millimeters

21

Page 20 Page 22
Page 21
Image 21
Zanussi ZCM 631 manual Fitting the Stability Bracket Not supplied, Connecting to Gas
Page 20 Page 22

ZCM 631 specifications

The Zanussi ZCM 631 is a versatile and efficient cooking appliance that perfectly balances performance and style for your kitchen. Renowned for its practical features and advanced technologies, this gas cooker is ideal for both budding home cooks and experienced chefs alike.

One of the standout features of the ZCM 631 is its powerful gas hob, which comes equipped with four burners of varying sizes. This allows for maximum flexibility when preparing meals, accommodating everything from small saucepans to larger pots for boiling or stewing. The burners are designed for efficient heat distribution, ensuring that your food cooks evenly and quickly. The inclusion of a heavy-duty cast iron pan support not only adds strength and stability but also provides a professional look to the cooker.

Another impressive aspect of the Zanussi ZCM 631 is its integrated oven, which offers a spacious capacity that can handle a variety of dishes, from roasts to baked goods. The oven features a fan-assisted cooking system, ensuring even heat distribution throughout the cavity to achieve consistently excellent results. Whether you're baking a delicate soufflé or roasting a joint of meat, the ZCM 631 provides the perfect environment for all your culinary creations.

Ease of use is a priority in the design of the ZCM 631. The appliance includes user-friendly controls that are straightforward and intuitive, allowing you to adjust temperatures and settings effortlessly. Additionally, the automatic ignition feature ensures that lighting the burners is a breeze, eliminating the need for matches or lighters.

Cleaning is made easy with this model, thanks to its enamel-coated surfaces which are resistant to stains and easy to wipe down. The oven door is also designed for easy removal, allowing for convenient access when it comes to deep cleaning.

In terms of safety, the Zanussi ZCM 631 is equipped with flame failure devices that automatically cut off the gas supply if the flame goes out, providing peace of mind while cooking.

With its stylish design, practical features, and innovative technologies, the Zanussi ZCM 631 is a fantastic addition to any kitchen, making it easier than ever to create delicious meals with confidence. Whether you’re a fan of traditional cooking methods or looking to modernize your culinary skills, the ZCM 631 offers everything you need to explore and enhance your cooking experience.
Top Page Image Contents