Zanussi ZCM 650 ZCM 651 manual Something not working, Symptom, Solution

Something not working

If the appliance is not working correctly, please carry out the following checks, before contacting your local Service Centre.

IMPORTANT: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is under guarantee.

SYMPTOM	SOLUTION
ƒ There is no spark when lighting the gas	 Check that the unit is plugged in and the electrical
	supply is switched on
	 Check that the RCCB has not tripped (if fitted)
	 Check the mains fuse has not blown
	 Check the burner cap and crown have been
	replaced correctly, e.g. after cleaning.
ƒ The gas ring burns unevenly	 Check the main jet is not blocked and the burner
	crown is clear of food particles.
	 Check the burner cap and crown have been
	replaced correctly, e.g. after cleaning.
ƒ The oven does not come on.	 Check that a cooking function has been selected.
	 Check the oven is in manual operation.
	 Check that the socket switch or the switch from the
	mains supply to the cooker are ON.
ƒ The oven light does not come on.	 Select a function with the oven function control
	knob.
	 Check the light bulb, and replace it if necessary
	(see "Oven Lamp replacement").
ƒ It takes too long to finish the dishes, or they are	 The temperature may need adjusting.
cooked too fast.
ƒ Steam and condensation settle on the food and the	 Refer to the contents of this booklet, especially to
oven cavity.	the chapter “Using the Oven”.
	 Leave dishes inside the oven no longer than 15-20
	minutes after the cooking is completed.
ƒ The oven fan is noisy.	 Check that shelves and bakeware are not vibrating
	in contact with the oven back panel.
ƒ The display shows "12.00".	 Set the time of day (see chapter "How to set the
	time of day").

27