INSTALLATION

1. PARTS REQUIRED

The loose hotplate parts are packed in the polystyrene fitment on top of the hotplate.

2. LEVELLING THE APPLIANCE

If the appliance requires levelling or its height adjusting (from the hotplate to any working surface), the procedure below must be followed:

1.Adjustment to suit floor conditions or height is obtained by rotating clockwise or anticlockwise the feet, at the front and rear of the appliance.

2.A spirit level should be placed on one of the oven shelves to confirm the appliance is correctly levelled.

3.FITTING THE STABILITY BRACKET

It is recommended that if the appliance is to be installed with a flexible supply pipe a stability bracket (SK.4729.A) is fitted and is available from your supplier (see Important Safety Requirements, Page 46). These instructions should be read in conjunction with the leaflet packed with the stability bracket.

1.Place the appliance in its intended position and level appliance.

2.Mark off 300mm from the left hand side of the appliance as shown in dimension 'A', Fig 2a. This is the centre line of the fixing bracket.

3.Draw a line 100mm from the front edge of the levelling feet (see Fig.2a) and remove appliance from its position. Mark off dimension 'B' (see Fig.2a) back from this line on the centre line of the bracket to locate the front edge of the lower bracket. Fix lower bracket (with two fixing holes) to the floor then measure the height from floor level to engagement edge on back of appliance, dimension 'C' of Fig.2b.

4.Assemble upper bracket to lower bracket so that underside of bracket is dimension 'C' +3mm above floor

level.

Reposition appliance and check that top bracket engages into appliance back as shown in Fig. 2b.

487mm (B)

100mm (C)

(A)

Fig. 2b

300mm

 

Fig. 2a

 

48

Page 47 Page 49
Page 48
Image 48
Zanussi ZCM ID manual Parts Required, Levelling the Appliance, Fitting the Stability Bracket
Page 47 Page 49

ZCM ID specifications

The Zanussi ZCM ID is a standout appliance designed for the modern kitchen, known for its user-friendly features, impressive technologies, and sleek design. As a versatile addition to any cooking space, this induction cooktop combines efficiency with style, making it a popular choice among both amateur cooks and culinary enthusiasts.

One of the key features of the Zanussi ZCM ID is its induction cooking technology. Unlike traditional gas or electric cooktops, induction cooking uses electromagnetic energy to heat pots and pans directly, ensuring rapid and precise temperature control. This not only speeds up the cooking process but also enhances safety, as the cooktop surface remains cooler to the touch, significantly reducing the risk of burns.

The cooktop boasts an intuitive interface, making it easy for users to navigate through its various settings. It features touch controls that allow for quick adjustments, ensuring a seamless cooking experience. The timer function is another highlight, enabling users to set specific cooking times for different dishes to achieve perfect results every time.

Another distinguishing characteristic of the Zanussi ZCM ID is its sleek design. The smooth glass-ceramic surface not only looks elegant but is also easy to clean. Spills and splatters can be wiped away effortlessly, saving time in kitchen maintenance. The modern aesthetic of the cooktop complements a variety of kitchen styles, from contemporary to traditional.

The appliance also features multiple cooking zones, each with varying sizes and power levels to accommodate different cookware. Whether using a small saucepan or a large frying pan, the Zanussi ZCM ID caters to diverse cooking needs. Furthermore, the boost function allows for extra power when boiling or searing, providing that additional burst of heat when needed.

Safety is a top priority with the Zanussi ZCM ID. The appliance is equipped with safety lock features to prevent accidental operation, especially in households with children. Additionally, the automatic shut-off function ensures that the cooktop turns off if it is left unused for a specific period, offering peace of mind to users.

In summary, the Zanussi ZCM ID is an innovative induction cooktop that offers a blend of advanced cooking technologies, stylish design, and exceptional safety features. With its user-friendly controls, easy maintenance, and efficient cooking capabilities, it stands out as a must-have appliance for anyone looking to elevate their culinary experience.
Top Page Image Contents