Cooking surface layout
12
145 |
| 180 |
mm |
| |
| mm | |
|
| |
180 |
| 145 |
mm |
| |
|
| mm |
5 | 4 | 3 |
Accessories
•Deep grill roasting pan
To bake and roast or as pan to collect fat.
•The roasting pan grid
1Single cooking zone 1200 W
2Single cooking zone 1800 W
3Single cooking zone 1200 W
4Residual heat indicator
5Single cooking zone 1800 W
To put in the deep roasting pan.
•Oven shelf
For cookware, cake tins, roasts.
Before first use
Warning! Refer to "Safety information" chapter.
Initial Cleaning
•Remove all parts from the appliance.
•Clean the appliance before first use.
Important! Refer to chapter "Care and Cleaning".
When you connect the appliance to the electrical supply or in case of a power cut, the Time function indicator flashes automatically.
To set the current time use " + " or " - " button.
After approximately 5 seconds, the flashing stops and the display shows the time of day set.
Setting the time
The oven only operates after time set.
time.
For time change you must not set an automatic
function (Duration 
or End 
) at the same
Hob - Daily use
Preheating
Set an oven function and maximum temperature and run an empty oven for 45 minutes, to burn off any residue from the cavity surface. Accessories can become hotter than in normal use. During this period an odour can be emitted. This is normal. Make sure the room is well venti- lated.
Preheat the two ovens. Heat up one oven at a time.
Warning! Refer to "Safety information" chapter.
6
