Unloading the dishwasher, Care and cleaning | Zanussi zdf231

For programmes with	When using detergent	Close the lid.
prewash add an addition-	tablets: place detergent
al detergent dose in com-	tablets in compartment
partmentB.	A.

Unloading the dishwasher

•Hot dishes are sensitive to knocks.

The dishes should therefore be allowed to cool down before removing from the appli- ance.

•Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one.

•Water may appear on the sides and the door of the dishwasher as the stainless steel will eventually become cooler than the dishes.

CAUTION!

When the washing programme has finished, it is recommended that the dishwasher is un- plugged and the water tap turned off.

Care and cleaning

Cleaning the filters

IMPORTANT!

NEVER use the dishwasher without filters. In- correct repositioning and fitting of the filters will produce poor washing results.

16

Image 16

Zanussi zdf231 user manual Unloading the dishwasher, Care and cleaning, Cleaning the filters

Contents

Dishwasher ZDF Contents Safety information General safetyChild safety Correct use Installation Control panel Starting the washing programme Delay start button Programme selector indicator light Indicator lights Washing programmes First use When using tablets that integrate rinse aid and detergent Set the water softener Setting the water softener manually see table Setting the water softener electronically see tableWater hardness Clarke Mmol/l Use of salt Filling with dishwasher salt Use only special salt suitable for dishwashers Filling with rinse aid Adjusting the dosage of rinse aid Loading cutlery and dishes Are of limited suitability Maximum height of the dishes Upper basket Adjusting the height of the upper basketLower basket Use of detergent To move to the higher position proceed as fol- lows Cleaning the filters Care and cleaningUnloading the dishwasher Cleaning the spray arms External cleaningInternal cleaning Prolonged periods of non- operation Frost precautions Environmental concernsMoving the machine Packaging material Possible cause and solution Fault code and malfunctionSomething not working Wash results are not satisfactory Technical data Consumption values Full load 12 standard place settings InstallationHints for test institutes Water connection Inlet hose Drain hose Electrical connection Guarantee conditions Guarantee/Customer ServiceFitting under a counter Levelling European Guarantee ExclusionsPage Page Page Page Page 156996240-00-15032007 Subject to change without notice