INSTALLATION

Warning

IF YOU ARE DISCARDING AN OLD APPLIANCE THAT HAS A LOCK OR CATCH ON THE DOOR, YOU MUST ENSURE THAT IT IS MADE UNUSABLE TO PREVENT YOUNG CHILDREN BEING TRAPPED INSIDE.

Positioning

This appliance should only be installed at a location where the ambient temperature corresponds to the climate classification indicated on the rating plate, which is located at the left on the inside of the appliance.

Depending upon the position which you choose for your appliance, you may wish to reverse the way in which the door opens. To do this, refer to instructions on “Door reversal directions” paragraph.

Important

It must be possible to disconnect the appliance from the mains power supply; the plug must therefore be easily accessible after installation.

The following table shows which ambient temperature is correct for each climate classification:

SN +10°C to + 32°C

N+16°C to + 32°C

ST +18°C to + 38°C

T+18°C to + 43°C

It should be located in a dry atmosphere, out of direct sunlight and away from extreme temperature e.g. not next to a boiler or radiator, or in a very cold room e.g. an outhouse, where the temperatures may fall below 10°C (50°F). If these temperatures are exceeded i.e. colder or warmer, then the appliance may not operate correctly.

You should also ensure that air can circulate freely around the back and the top of the cabinet. There must also be at least 100 mm (4”) distance between the top of the cabinet and any overhanging kitchen furniture (A). Ideally, the appliance should not be positioned beneath overhanging furniture (B).

mm100

A mm10 NP00

B

10 mm

There should also be a gap of 25 mm either side of the appliance. Do not obstruct the space underneath.

Rear spacers

The plastic bag containing all relevant documentation also contains two spacers to be fitted into special holes in the back of the appliance.

Fit the spacers into the holes, taking care to ensure that the arrow (A) is positioned as shown in the diagram. Then turn them through 45° (arrow (A) vertical) until they lock into place.

DO NOT install in places with restricted ventilation.

Adjust the level of the appliance by screwing out the adjustable foot, or feet, at the bottom of the cabinet using your fingers or a tool (see figure).

A

45°

PR60

D200

14

Page 13 Page 15
Page 14
Image 14
Zanussi ZEBF 262 W manual Installation, Positioning, Rear spacers
Page 13 Page 15

ZEBF 262 W specifications

The Zanussi ZEBF 262 W is a versatile built-in fridge freezer that combines style and functionality, making it an ideal choice for modern kitchens. With a sleek and contemporary design, this appliance not only provides ample storage space, but also enhances the aesthetics of your kitchen environment.

One of the standout features of the Zanussi ZEBF 262 W is its generous capacity. With a total storage volume of approximately 260 liters, it offers ample room for all your groceries, whether fresh or frozen. The refrigerator compartment, with its adjustable shelves, allows for efficient organization of food items, ensuring that everything is easily accessible. Its transparent fruit and vegetable drawers ensure that you can keep your produce fresh and visible.

The freezer section has been designed with efficiency in mind. With a freezing capacity that allows you to freeze fresh food quickly, this appliance not only preserves the foods’ nutrients but also minimizes ice crystal formation, which can affect quality. The ZEBF 262 W is equipped with a frost-free technology that eliminates the need for manual defrosting, saving you time and effort.

Energy efficiency is another prominent characteristic of the Zanussi ZEBF 262 W. Rated with a high energy efficiency class, this fridge freezer helps you save on electricity bills while reducing your environmental footprint. The Eco Mode feature optimizes energy consumption when the appliance is not in heavy use, further enhancing its efficiency.

In terms of usability, the Zanussi ZEBF 262 W includes user-friendly controls for temperature regulation, allowing you to set optimal conditions for preserving different types of food. Its multi-airflow system ensures an even distribution of cold air throughout the appliance, maintaining consistent temperatures across all compartments.

Furthermore, the appliance is designed with quiet operation in mind, making it a great addition to any home without the disruptive sounds often associated with refrigerator units. The stylish white finish ensures that it seamlessly blends in with various kitchen decors.

In conclusion, the Zanussi ZEBF 262 W offers a perfect combination of spaciousness, energy efficiency, advanced technologies, and modern design. Its features make it an essential appliance for anyone looking to enhance their kitchen with a reliable and stylish fridge freezer.
Top Page Image Contents