Building in
Building over a cupboard or drawer
If the hob is to be installed above a cupboard or drawer it will be necessary to fit a heat resistant board below the base of the hob on the underside of the work surface.
Building over a kitchen unit with door
Proper arrangements must be taken in designing the furniture unit, in order to avoid any contact with the bottom of the hob which can be heated when it is operated. The recommended solution is shown in diagram 1.
The panel fitted under the hob ("a") should be easily removable to allow easy access if technical assistance is needed. The space behind the kitchen unit ("b") can be used for connections.
Building over a kitchen unit with oven
If the hob is built into a kitchen unit with an oven underneath, the recess must have the dimensions shown in diagrams 2 and 3, and should also incor- porate suitable oven crosspiece supports to ansure an efficient cooling air circulation.
Diagrams 4 and 5 give two
The electric connection of the hob and the oven should be carried out separately, for electrical safety reasons to permit easy extraction of the oven from the front part of the kitchen unit.
|
| 1 | |
|
| 30 | |
| a | min | |
60 | 20 | ||
| |||
| b |
|
FO 1013
a)Removable panel
b)Room for connections
2
FO 0947
4
3 |
550 min. |
560 min. |
FO 0198 |
5 |
FO 0939
FO 0938
9
