Operating Sequence
Before the first wash, we recommend that you run a cotton cycle at 60°C, without any laundry in the machine, to remove any manufacturing residue from the drum and tub.
Pour 1/2 a measure of detergent into the dispenser drawer and start the machine.
1. Load the laundry
Open the door by pulling the door handle outwards. Place the laundry in the drum, one item at a time, shaking them out as much as possible. Close the door.
4. Switch the machine on
To switch the machine on, press the ON/OFF button: the
ON / OFF
5. Select the required programme
Turn the programme selector dial to the desired position: the lights corresponding to the different phases making up the selected programme light on.
P0004
2. Measure out the detergent
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required and pour it into the main wash compartment 
.
SPECIAL | O |
| COTTON |
PROGRAMMES | 95º |
| |
| 60ºE | ||
|
|
| 60º |
|
|
| 40ºE |
|
|
| 40º |
|
|
| 30º |
WOOL30º |
|
| 60º |
40º |
|
| 40ºE |
30º 40º |
| 30º | 40º |
DELICATES |
|
| SYNTHETICS |
DOOR PREWASH
WASH
RINSES
DRAIN
SPIN
CLOGGED FILTER
END
If you have selected the PREWASH option or the SOAK programme, pour detergent into the compartment marked 
.
P0006 |
3.Measure out the fabric softener
If required, pour fabric softener into the compartment marked 
(the amount used must not exceed the “MAX” mark in the drawer).
Close the drawer gently.
P0005 |
6.Select the SPIN speed or RINSE HOLD option
Depress the spin speed button to choose the required speed or RINSE HOLD option: the corresponding light comes on.
1200
900
700
500
RINSE
HOLD
SPIN
10
