Zanussi ZKC6040 user manual The grill, Hot hob indicator, Using the grill, Things to note

Models: ZKC6040

1 40
Download 40 pages 54.37 Kb
Page 14
Image 14
Hot hob indicator
If spillage occurs with sugar solutions, e.g. jams and syrups, it must be wiped from the hob before it sets and becomes hard otherwise damage to the hob will occur.

Avoid using thin, badly dented or distorted saucepans. Those with uneven bases should not be used.

Never leave the hotplates on when not covered with a saucepan.

Ensure that the hob and saucepans are clean and dry before the start of cooking.

Follow the cleaning instructions very closely to keep the hob looking like new.

Hot hob indicator

The hob is fitted with a hot hob indicator light, which illuminates when the hob is too hot to touch. The light will go off when the hob has cooled.

IMPORTANT!

Do not allow hot pans or baking trays to touch the controls as dammage may occur.

The grill

The grill CAUTION!

Accessible parts may be hot when the grill is in use. Young children should be kept away.

The grill is a dual circuit grill which means that the full area of the grill can be used, or for economy purposes, the centre section only can be used when cooking smaller quantities of food.

Using the grill

Turn the top oven/grill grill to the required setting.

The grill settings are as follows:-

Full grill area at ¼ power.

Centre grill area at full power.

Full grill area at full power.

Things to note

To ensure optimal cooking performance the elements have been carefully designed, so that only the inner element glows red. The outer element is hot, but will remain dark in colour. This gives you the best possible cooking results.

14

The cooling fan for the controls may operate after a time.

Some smoke from fat splashes may be evident as the grill cleans itself.

Using the grill WARNING!

Never cover the grill pan or grid with foil as this can lead to grill fires.

Page 14
Image 14
Zanussi ZKC6040 user manual Hot hob indicator, Using the grill, Things to note, The grill settings are as follows