OPERATIONGB
Setting the temperature
The temperature inside the refrigerator is regulated by a thermostat with 6 temperature positions and one «OFF» (O) position.
Position 1 = minimum coldness
Position 6 = maximum coldness
Turn the thermostat dial to the required position; the intermediate position is usually the most suitable (3- 4).
The thermostat setting can vary as the temperature inside the refrigerator compartment depends on the following factors:
–room temperature
–how often the door is opened
–how much food is stored
–position of the appliance
Important
If the fridge is not defrosting correctly, it is possible that because a very low temperature has been selected, the motor is working continuously, which prevents the defrost cycle from operating.
To ensure correct defrosting, a lower number should be selected on the thermostat and you should notice that the motor cuts out from time to time, which is correct.
If you wish to return to a lower temperature, turn the thermostat to a higher number; however you should turn the setting lower occasionally to allow automatic defrosting.
Storing deep-frozen foods
The compartment marked reaches a temperature of
For best use of the compartment, the following points shoud be noted: ensure that the deep- frozen products have been correctly stored by the
there is a power failure. If the compartment is full and the failure does not last long, the food will not be affected; otherwise, you are advised to consume it soon after.
Ice cubes
Refrigerators with the compartment are provided with an ice cube tray.
This tray must be filled with drinking water and placed in the compartment.
Never use metal tools to detach the tray.
15