Panasonic AWHE50HN manual  Brightness,  Limitation Setting

Web setting screen

Brightness

Use this to adjust the image brightness manually.

Use this to make the image darker. It does not work during automatic adjustments.

Use this to make the image lighter. It does not work during automatic adjustments.

Use this to adjust the image brightness automatically.

Control pad and its buttons

To adjust the image in the horizontal or vertical direction (panning or tilting), left-click the pad and the buttons.

The more the outside of the pad is clicked, the faster the camera operates. Adjustment is also possible by dragging the mouse.

Right-click the pad to initiate zooming and focusing.

When the top half of the pad is clicked in the up or down direction, the zoom (magnification) is adjusted in the Tele direction; conversely, when the bottom half of the pad is adjusted, the zoom is adjusted in the Wide direction.

When the left half of the pad is clicked in the left or right direction, the focus is adjusted in the Near direction; conversely when the right half of the pad is adjusted, the focus is adjusted in the Far direction.

The zooming can also be adjusted by operating the mouse wheel.

Note

ppWhen the mouse is used for dragging and dropping from the control pad area to a position outside this area, the panning, tilting and other operations will not stop.

In a case like this, click the control pad area to stop these operations.

Limitation Setting

This establishes the up, down, left and right limit settings of the pan-tilt head.

First, move the pan-tilt head to the position where the limit is to be set, and press the corresponding button below to set the direction (up, down, left or right) in which the limit is to be set.

After each setting has been selected, press the Set button to enter the setting.

Tilt Up	Use this to save the current position as
	the upward limit.
Tilt Down	Use this to save the current position as
	the downward limit.
Pan Left	Use this to save the current position as
	the leftward limit.
Pan Right	Use this to save the current position as
	the rightward limit.
Set/Reset	Use this to enable or disable the limit
	setting in each direction.

This is used to close this panel.

62