Panasonic AWHE50HN manual  Output, ENH setting instead

Web setting screen

Output

This item’s setting is reflected when the Set button is pressed.

Format [1080i, 720p, 480i]

The video format is changed on this screen.

Down CONV. Mode

[Squeeze, SideCut, LetterBox]

The down-conversion mode is selected here.

HDMI Color (AW‑HE50H only)

[RGB-NOR, RGB-ENH, YCbCr422, YCbCr444]

Set here is the HDMI color output.

When an HDMI monitor is used, use “YCbCr422” under normal circumstances.

In cases where, for instance, HDMI (RGB) signals are converted and output to a DVI monitor, the settings required will differ depending on the color gradation supported by the monitor.

RGB-NOR The RGB output signals are output in

Squeeze

When the 4:3 aspect ratio has been set for the monitor screen, the images are squeezed horizontally and extended vertically changing the view of the angle.

the 16 to 235 range.

RGB-ENH The RGB output signals are output in

the 0 to 255 range.

 If the black parts of the images appear overexposed

when “RGB-NOR” has been selected, use the “RGB-

ENH” setting instead.

 Conversely, if the images are displayed with a loss of

dark detail when “RGB-ENH” has been selected, use

SideCut

With the vertical height serving as the reference, the parts which extend beyond this at the two sides are cropped changing the view of the angle.

With the horizontal width serving as the reference, black bands are added at the top and bottom changing the view of the angle.

the “RGB-NOR” setting instead.

Note

ppIf an HDMI Color setting which is not supported by the monitor has been specified, the HDMI Color setting may be changed automatically.

(The menu display will remain unchanged.)

With the AW‑HE50S, this item cannot be selected.

LetterBox

ppWhen output is selected for the color bar, the mode is fixed to Squeeze.

If “SideCut” or “LetterBox” has been selected, the HDMI output will not appear for a few seconds when the color bar display is set to ON or OFF.

64