Manuals / Panasonic / Household Appliance / Home Security System

Panasonic AWHE50HN manual WwManually adjusting the iris

Models: AWHE50HN

1 90

Download 90 pages 45.33 Kb

Page 16

Manual shooting

wwManually adjusting the iris

The lens iris can be adjusted manually.

When performing the operations using the wireless remote control

1Press the [M/IRIS] button to switch the iris to manual adjustment.

2Adjust the iris using the [IRIS +] or [IRIS –] button.

Press the [IRIS +] button to adjust the lens iris in the opening direction; conversely, press the [IRIS –] button to adjust the lens iris in the closing direction.

3If necessary, press the [A/IRIS] button to return the iris to the automatic adjustment.

When performing the operations using the controller

When the AW‑RP655 is connected:

1Press the [IRIS] button several times to turn off the button’s lamp and switch to manual adjustment.

2Adjust the iris manually by turning the dial above the lighted [IRIS] lamp whether it is the lamp of the [PAN/TILT] lever or [ZOOM] lever.

3If necessary, press the [IRIS] button several times and turn on its lamp to return the iris to the automatic adjustment.

When the AW‑RP555 is connected:

1Press the [IRIS] button to turn off its lamp and switch to manual adjustment.

2Turn the [LEVEL] dial of [IRIS] to adjust the iris manually.

The position of the [LEVEL] dial does not represent an absolute value. This is why the brightness may differ from one camera to another even when the dial is set to the same position.

3If necessary, press the [IRIS] button to turn on its lamp and switch to automatic adjustment in order to return the iris to automatic adjustment.

When the AW‑RP50 is connected:

Refer to the Operating Instructions of the controller.

16

Image 16

Panasonic AWHE50HN manual WwManually adjusting the iris

Contents

AW‑HE50SN Contents WwOverview Before useWwConcerning the Operating Instructions WwTrademarks and registered trademarks WwRequired personal computer environmentWwAbout copyright and licence WwDisclaimer of warranty WwNetwork securitySelect the shooting mode Basic shooting operationsHow to turn the power on and off WwTurning the power onSet the Operate switch on the controller to on When the AW‑RP50 is connectedWwTurning the power off Set the Operate switch on the controller to OFFSelecting the shooting modes scene files Selecting the unitsWwTypes of shooting modes WwHow to select the shooting mode Press the Menu button Turn the jog dial mainPress the OK button Press the OK button againQqUsing the zoom function QqSwitching the direction or zoom speedShooting QqChanging the camera’s directionLens focus is not adjusted automatically Unit does not moveMultiple color bands color bars are displayed Menu screen is displayedMore advanced operations WwManually adjusting the focus Manual shootingWwManually adjusting the iris WwManually adjusting the shutter speed Press the Shutter button and turn its lamp onPress the OFF, LOW or HI button WwManually adjusting the gainPress the Gain button to turn off its lamp Preset memories Position may occurSet to the memory recording mode Set the memory recording modeHold down the Reset button Hold down the Memory buttonWhen the AW‑RP555 is connected WwWhite balance adjustment White balance adjustmentQqAutomatic adjustment AWB AWB A or AWB B Press the SET button for 2 seconds Press the AWC buttonQqAuto tracking white adjustment ATW When the AW‑RP50 is connectedBlack level master pedestal adjustment WwBlack level master pedestal adjustmentPress the M/IRIS button Press the IRIS - buttonPress the Iris button several times to turn off its lamp Press the Iris button several times to turn off its lampWwGenlock adjustment Genlock adjustment AW‑HE50S onlyQqHorizontal phase adjustment QqColor phase adjustment Press the Mode buttonGenlock adjustment AW‑HE50S only Basic operations Table of operationsChanging Press the  or  button to change the setting Press the  buttonJog dial main Jog dial RQqProcedure for camera menu operation AW‑RP655 Press the Menu button for 2 seconds to exit the camera menuMode button lights up at the BAR setting QqProcedure for camera menu operation AW‑RP555 Press the Menu button of the AW‑RP555 for 2 secondsPerform one of the following steps to select the menu item Press the Item buttonQqProcedure for camera menu operation AW‑RP50 Camera OSDWwSetting the menu items Setting the menu itemsWwTop Menu WwCamera screen When FullAuto is selected WwCamera screen When Manual1 to 3 is selectedWwContrast screen WwPicture 1/2 screen WwPicture 2/2 screen WwSystem screenWwGenlock screen AW‑HE50S only WwOutput screenRGB-NOR QqChanging the format Format change check screenFormat Set screen Format unchanged screenWwOther 1/2 screen Tally Enable Disable, Enable Wireless Control Disable, EnableWwOther 2/2 screen OSD Off With Tally Off, OnWwMaintenance screen WwFirmware Version screenMenu settings initialized screen Menu settings unchanged screenQqConcerning initialization Initialize screenMenu Factory setting Selection items FullAuto Menu item tableWeb setting screen Control Setup WwMenu operations Control button / Setup button  Power on button / Standby buttonWwControl screen  Zoom  Focus Control pad and its buttons  Preset Brightness QqBasic screen WwSetup screen Basic button Preset position Image  Image Image adjustQqImage screen Image adjust screen  Contrast Contrast Mode Auto, Manual  Scene FullAuto, Manual1, Manual2, Manual3 Picture Chroma Level -3 to +3 AWBPreset position setting screen  Preset  Zoom  Focus Limitation Setting  BrightnessSystem  Genlock AW‑HE50S onlyENH setting instead  OutputInstall Position Desktop, Hanging  OtherQqUser mng  IP address Host auth. screen  Host auth Host check QqServer Network screen  IP network QqNetworkIP address Subnet mask Default gatewayPort numbers already used 20, 21, 23, 25, 42, 53, 67, 68  Password 0 to 32 half-size characters  Access intervalDdns screen  Host name 1 to 64 half-size charactersSnmp screen  Community 0 to 32 half-size characters Location 0 to 32 half-size characters  Contact 0 to 255 half-size charactersQqMaintenance  Error descriptionSystem log screen  Time & dateUpgrade screen Click the Execute buttonEnter the software version in the xxxxx part Default reset screen  Reset to the default Except the network settings Load the default Html files setup menu  Reset to the default and load the default Html files Download Back up screen Upload Other screen DDNS-related error displays NTP-related error displaysLogin-related displays Category Display Description of errorLimiters Setting/releasing the limiters WwSetting the limitersWwBasic limiter operations Press one of the CAM1 to CAM4 buttons to select the unitWwResetting the limiters WwReleasing the limitersPp Releasing the upper limit position of the movement range Pp Releasing the lower limit position of the movement rangeWwConcerning the safe mode Safe modeTrouble-triggered safe mode WwSystem requirements for a PC CPUSymptom WwPrecautions when using Windows VistaSolution Symptom Restriction When activating audio on the web browser QqRestrictionsWwPrecautions when using Windows Restriction 1 On the setup pages for some products Restriction 2 When using Windows 7 with some productsPanasonic Solutions Company