Panasonic AWHE50HN manual Mode button lights up at the BAR setting

Basic operations

wwControl exercised from the Multi Hybrid Control Panel AW‑RP555

Each time the [GAIN] button is pressed, the setting is switched in the sequence of GAIN AUTO  0dB  L (9dB)  H (18dB), and the mode is displayed by the LEDs as shown below.

[ON: LED lighted; OFF: LED off]

	GAIN	MANU L	MANU H
	button	LED	LED
AUTO	ON	OFF	OFF
0dB	OFF	OFF	OFF
LOW	OFF	ON	OFF
HIGH	OFF	OFF	ON
Others	OFF	ON	ON

Each time the [MODE] button is pressed, the setting is switched between CAM and BAR.

The [MODE] button lights up at the BAR setting.

For executing AWB. *1, *2

The unit does not have an ABC function.

For switching the SCENE file (FullAuto, Manual1 to 3).

For operating the camera menus.

MENU: This operates in the same way as MENU on the camera.

ITEM: This operates in the same way as ENTER on the camera.

YES: This operates in the same way as UP on the camera.

For selecting the cameras to be operated.

Shutter mode selection

Each time this button is pressed, one of the shutter modes set by the controller or “shutter OFF” is selected.

The [SHUTTER] button lights up in all modes except shutter OFF.

The shutter mode settings established by the [PRESET] buttons are as follows.

MODE	PRESET	MODE	PRESET
	No.		No.
1/100	PRESET1	1/10000	PRESET7
1/250	PRESET2	SYNCHRO-	PRESET8
1/500	PRESET3	SCAN
1/1000	PRESET4	ELC	PRESET9
1/2000	PRESET5	OFF	PRESET10
1/4000	PRESET6

For switching WHITE BAL A, B or ATW.

NO: This operates in the same way as DOWN on the camera.

Each time the [EXT(AF)] button is pressed, the focus setting is switched between auto focus and manual focus.

When auto focus is selected, the [EXT(AF)] button lights.

When the focus setting is switched between auto focusing and manual focusing by the camera, the resulting status (lamp on or off) will not be reflected in the button.

*1: The lamp of the AWC switch flashes while automatic white balance is being executed. When AWB is completed successfully, the lamp goes off; when it is not completed successfully, it lights up.

*2: The switch lights without AWB being executed when the white balance mode of the main unit is ATW, or when the Color Bar is being displayed.

35