Panasonic AWHE50HN manual Press the Menu button, Turn the jog dial main, Press the OK button

Selecting the shooting modes (scene files)

When performing the operations using the controller

When the AW‑RP655 is connected:

1Press the [1], [2], [3], [4] or [5] button of

[CONTROL/PREVIEW MONITOR OUT SEL].

2Press the [MENU] button.

The display on the LCD panel of the AW‑RP655 switches to the menu mode.

3Turn the jog dial (main).

Display “CAMERA SETTING” on the LCD panel.

4Press the [OK] button.

Display “OPEN CAMERA MENU?  OK Key” on the LCD panel.

5Press the [OK] button again.

The Top Menu is displayed on the monitor.

Top	Menu
Camera	Scene: FullAuto
System

Maintenance

6Turn the jog dial (main) to bring the cursor to “Camera”.

7Press the jog dial (main).

The “Camera” sub‑menu is displayed on the monitor.

Camera
Scene	FullAuto
Contrast Level	0

Return

8Turn the jog dial (main) to bring the cursor to “Scene”, and then press the jog dial (main) to start the shooting mode blinking.

9Turn the jog dial (main) to select the shooting mode to be used, and press the jog dial (main) to enter the selection.

10 Press the [MENU] button or [R/B GAIN/PED] button.

The menu display is exited.

When the AW‑RP555 is connected:

1Press the [1], [2], [3], [4] or [5] button of [CONTROL] to select the unit.

2Press the [1], [2], [3] or [USER] button of [SCENE FILE] to select the shooting mode.

Shooting mode	[SCENE FILE] button
Manual1	[1]
Manual2	[2]
Manual3	[3]
FullAuto	[USER]

When the AW‑RP50 is connected:

Refer to the Operating Instructions of the controller.

11