Panasonic AWHE50HN manual WwGenlock screen AW‑HE50S only, WwOutput screen

Setting the menu items

wwGenlock screen (AW‑HE50S only)

Genlock
Horizontal	Phase	0
Subcarrier	Phase
Coarse		90°
Fine		0
H Phase.SC	Fine Step	1

Return

Horizontal Phase [–206 to +49]

This is used to adjust the horizontal phase during genlock.

Subcarrier Phase Coarse [0° to 315°]

This is used to adjust coarsely the color phase during genlock.

wwOutput screen

	Output
Format		1080i
Down	CONV. Mode	Squeeze
HDMI	Color	YCbCr422

Return

Format [1080i, 720p, 480i]

The video format is changed on this screen. For details on how to change the format, refer to “Changing the format” (page 45).

Down CONV. Mode

[Squeeze, SideCut, LetterBox]

The down-conversion mode is selected here.

This setting is valid for the VBS signal output.

Subcarrier Phase Fine [–127 to +127]

This is used to adjust finely the color phase during genlock.

This setting is valid for the VBS signal output.

H Phase. SC Fine Step [1 to 10]

Squeeze

When the 4:3 aspect ratio has been set for the monitor screen, the images are squeezed horizontally and extended vertically changing the view of the angle.

This is used to select the amount by which the horizontal phase (Horizontal Phase) is to be adjusted and by which the color phase (Subcarrier Phase Fine) is to be adjusted finely.

Return

Use this to return to the previous menu.

SideCut

With the vertical height serving as the reference, the parts which extend beyond this at the two sides are cropped changing the view of the angle.

LetterBox

With the horizontal width serving as the reference, black bands are added at the top and bottom changing the view of the angle.

ppWhen output is selected for the color bar, the mode is fixed to Squeeze.

If “SideCut” or “LetterBox” has been selected, the HDMI output will not appear for a few seconds when the color bar display is set to ON or OFF.

43