Zanussi ZKC 49/3 manual D532, D533 D471, D472

Insert the adjusting pins (B-Fig. 10) into their locations in the door and screw them in.

Hook the decorative panel onto the top part of the door, inserting the pins (B) (on the door) into the elongated holes (1) (in the top bracket fitted to the panel) (Fig. 11).

Insert the securing screws (C) through elongated holes (2) and fix the panel without tightening the screws (Fig. 11).

Fig. 10

B

D532

Fig. 11

1

B

C

Once the top of the panel has been correctly positioned, fix it through the holes in the bottom bracket, without tightening the screws (Fig. 12).

Check the position again by slackening the screws and pins then, once the best position has been obtained, fully tighten all the fixings.

D533

D471

2

Fig. 12

Fig. 13

Cover the visible part of the top bracket on the panel with plastic cover (D), inserting it in the locations provided in the bracket.

D

D472

11