Operation of the cooking surface
When the cooking zones are switched on, they may hum briefly. This is a characteristic of all ceramic glass cooking zones and does not im- pair either the function or the life of the applian- ce.
Control knobs
The control knob is used to set the required heat output continuously from 1±10.
It can be turned to the right or left.
When you turn the regulator back to the zero position, the cooking zone will be switched off.
Switching on the double circuit cooking zone
On the double circuit cooking zones only the inner hea- ting circuit is switched on first.
If you want to heat the whole zone, you will have to turn the rotary switch slightly past position «10» to the point where it automatically springs back to position «10».
Residual heat indicator
An indicator is assigned to each cooking zone. This il- luminates as soon as the corresponding cooking zone becomes hot and warns against inadvertent touching.
Important! As long as the residual heat indica- tor is illuminated, there is a risk of burns.
Even after the cooking zone is switched off, the corres- ponding residual heat indicator will remain on until the cooking zone is cold.
You can use the residual heat for melting and keeping food warm.
53
