Cleaning inside the grill and oven compartments
The vitreous enamel coating in the grill/top oven and main oven compartments can be cleaned using normal oven cleaners with care.
Ensure that the manufacturers instructions are followed and that all parts are well rinsed afterwards.
Warning! Aerosol cleaners must not come into contact with elements, the door seal, or any painted
finishes as this may cause damage.
Cleaning the door(s)
Warning! Under no circumstances should the door assembly be detached from the product for
cleaning.
Warning! To prevent damaging or weakening the door glass panels avoid the use of the following:
•Household detergents and bleaches.
•Soap Impregnated pads unsuitable for
•Abrasive cleaning pads, scorers and steel wool pads.
•Chemical oven pads or aerosols.
•Rust removers.
•Bath/Sink stain removers.
Cleaning between the outer and inner door glass
The door glass is removable for cleaning.
Clean the outer and inner glass using hot soapy water or hob cleaner may be used. Do not use hob cleaner on the Stainless Steel or painted finishes.
Ensure that all parts are well rinsed and thoroughly dried before attempting to replace the outer door.
What to do if…
Warning! Repairs to the appliance must only be carried out by qualified service engineers.
Considerable danger to the user may result from improper repairs.
In the case of misuse the visit by the Customer Care Department technician or the repair may be charge-
able, even during the warranty period.
Information for appliances with metal fronts:
Due to the appliance's cool front, when the door is opened during or shortly after baking or roasting, there
may be condensation of the inner glass panel for a short while.
Please carry out the following checks on your appliance before calling a Service Engineer. It may be that the prob- lem is a simple one which you can solve yourself without the expense of a service call.
Please note that proof of purchase is required for in- guarantee service calls.
Problem
The grill, ovens and timer do not work.
The grill does not work or cuts out after being used for a long period of time.
The indicator neons are not working correctly.
Possible Solution
Check that the appliance has been wired in to the appliance supply and is switched on at the wall.
Check that the main appliance fuse is working.
If you have checked the above: Allow the appliance to cool for a couple of hours. The appliance should now be working normally.
Ensure the cooling fan is running when the grill is on. If the cooling fan fails, the grill will not operate correctly. Contact your local service force centre.
Leave the grill door open and allow the grill to cool. After a couple of hours check that the grill works as normal
Check that you have selected only the function you require. Ensure all other controls are in the off position.
17
