Zanussi ZOP37902 Cleaning the oven door, Cleaning reminder, The cleaning reminder goes out

Models: ZOP37902

1 24
Download 24 pages 11.16 Kb
Page 16
Image 16
Cleaning reminder

1.Remove the removable shelf supports (if applicable) and accessories from the appliance. Refer to "Re- moving the shelf supports".

Caution! Do not let the removable shelf supports stay in the appliance during Pyro Cleaning. There is

a risk of damage.

2.Remove the worst dirt manually.

3.Fully close the oven door.

The Pyro Cleaning procedure cannot start if you do not close the oven door.

4.Set the function Pyro Cleaning. Refer to "Oven func- tions".

5.When The cleaning reminder goes out:Before you change the oven lamp:Cleaning the oven door flashes, press + or - to set the necessary procedure:

P1 - if the oven is not very dirty. The procedure is 1 h long.

P2 - if the oven is more dirty. The procedure is 1 h 30 min long.

6.Press Removing the oven door and the glass panels to start the procedure. You can use the End function to delay the start of the cleaning. When the oven is at the set temperature, the door

locks. The display shows the symbol Manual background and the bars of the heat indicator.

To stop Pyro Cleaning before it is completed, turn the knob for the oven functions to the off position.

When Pyro Cleaning is completed, the display shows the time of day. The oven door stays locked. When the appli- ance is cool again, an acoustic signal sounds and the door unlocks.

During Pyro Cleaning the oven lamp is off.

Cleaning reminder

To remind you that Pyro Cleaning is necessary, PYR flashes in the display for 10 seconds after each activation and deactivation of the appliance.

The cleaning reminder goes out:

After the end of the Pyro Cleaning function

If you press + or - when Manual background flashes in the display.

Oven lamp

Warning! Be careful when you change the oven lamp. There is a risk of electrical shock.

16

Before you change the oven lamp:

Deactivate the oven.

Remove the fuses in the fuse box or deactivate the cir- cuit breaker.

Put a cloth on the bottom of the oven to prevent damage to the oven light and glass cover.

Always hold the halogen lamp with a cloth to prevent grease residue from burning on the lamp.

1.Turn the glass cover counterclockwise to remove it.

2.Clean the glass cover.

3.Replace the oven light bulb with an applicable 300 °C heat-resistant oven light bulb.

Use the same oven lamp type.

4.Install the glass cover.

Cleaning the oven door

The oven door has three glass panels. You can remove the oven door and the internal glass panels to clean them.

The oven door can close if you try to remove the glass panels before you remove the oven door.

Removing the oven door and the glass panels

1 Open the door fully

2 Lift and turn the levers

and hold the two door

on the two hinges.

hinges.

 

www.zanussi.com

Page 16
Image 16
Zanussi ZOP37902 user manual Cleaning the oven door, Cleaning reminder, The cleaning reminder goes out, Oven lamp