Zanussi ZOP37902 user manual What to do if…, Installing the door and the glass panels

3 Close the oven door	4 Put the door on a soft
to the first opening posi-	cloth on a stable surface.
tion (halfway). Then pull
forward and remove the
door from its seat.
	90°
5 Release the locking	6 Turn the two fasteners
system to remove the	by 90° and remove them
glass panels.	from their seats.

1 2

7Carefully lift (step 1) and remove (step 2) the glass panels one by one. Start from the top panel.

Clean the glass panels with water and soap. Dry the glass panels carefully.

Installing the door and the glass panels

When the cleaning is completed, install the glass panels and the oven door. Do the above steps in the opposite se- quence.

The middle panel has a decorative frame. The screen- printing zone must face the inner side of the door. Make sure that after the installation the surface of the glass pan- el frame on the screen-printing zones is not rough when you touch it.

Make sure that you install the top panel in the seats cor- rectly. Refer to the illustration.

What to do if…

Warning! Refer to "Safety information" chapter.

Problem

The oven does not heat up.

Possible cause

The appliance is deactivated.

Solution

Activate the appliance.

www.zanussi.com 17