TO REPLACE THE OUTER DOOR GLASS
1.Holding the oven glass with both hands, gently place the locators into the holes of the brackets at the bottom of the oven door.
2.Holding the door glass with your left hand, use your right hand to open the oven door.
Bring the door gently towards the glass panel ensuring the screw location holes line up.
3.Place the trim in the correct position on the top of the grill door.
4.Hold the glass in place with one hand and insert the cross head screws with washers into the location holes with the other hand. Give the screws one turn to ensure the glass is secure.
5.Tighten the screws positively with a Pozidrive screwdriver before closing the oven door.
Do not attempt to use the oven without the glass being in place.
TO CLEAN THE INNER GLASS DOOR
The inner glass door is not removable. Clean using hot soapy water or Hob Brite and a soft cloth. Do not use abrasives as they may damage the glass or seal.
CLEANING THE SHELVES, WIRE-WORK RUNNERS AND GRILL/OVEN FURNITURE
All removable parts, except the grill pan handle can be washed in the dishwasher.
The grill pan, grill pan grid, oven shelves and wirework runners may be cleaned using a soap impregnated steel wool pad. Soaking first in hot soapy water will make cleaning easier.
REPLACING AN OVEN LIGHT BULB
Disconnect the appliance from the electricity supply before replacing the bulb.
The type of bulb required is a 300°C, 25 watt small Edison Screw.
1.Make sure the appliance is cool before you replace a bulb
2.Open the door and remove the shelves and wirework runners.
3.Pull the glass bulb cover towards you and then pull it off. If necessary use a screwdriver to carefully lever off the cover, taking care not to damage the oven cavity.
4.Unscrew the bulb by turning it to the left.
5.Fit a new bulb and then replace the glass bulb cover.
6.Refit the wirework runners and replace the oven shelves
7.Restore the appliance to the electricity supply and reset the time of day.
25
