Operating sequence
1. Check the filters
Ensure they are clean and properly positioned (see cleaning instructions).
2. Press the On/Off pushbutton
In the digital display will appear the number of the last programme selected
3. Check that there is rinse aid and salt
The indicator lights will illuminate if refilling is necessary.
4. Load the dishes
Remove any scraps of food.
Pull the lower basket out and arrange the saucepans, plates and cutlery in it.
Pull the upper basket out and arrange the plates, saucers, glasses and cups etc. in it.
Slide the basket back into the machine.
5.Ensure that the spray arms can rotate freely
6.Measure out detergent
Add the required amount of detergent into the dispenser according to the "Washing programmes" chart.
7.Close the detergent dispenser lid
8.Set the programme
Press the programme selector button until the number corresponding to the required programme appears in the display.
If a programme with prewash has been selected the SID indicator light will come on.
The following options may also be selected:
"Half load" by pressing the corresponding button.
The indicator light of the selected basket will come on.
Remember to load the dishes in the selected basket.
"Economy drying / no drying" by pressing the corresponding button. The indicator light of the option selected will come on.
"Delay start".
9. Start the programme
Close the dishwasher door. The programme starts. An audible signal will inform you of this.
If a delay start has been selected, the countdown starts when the door is closed. The number of hours to go before the programme starts will be indicated in the digital display.
Once the delay set has elapsed, the programme starts automatically.
17 | POS11UK |
