Zanussi ZT 6810 manual At the end of the washing programme

Models: ZT 6810

1 32
Download 32 pages 61.46 Kb
Page 18
Image 18

10. At the end of the washing programme

The dishwasher will automatically stop, and an intermittent audible signal informs you that the programme has finished (if the delay start has been selected this audible signal will be automatically excluded).

In the digital display will appear 3 horizontal lines (---).

Switch off the dishwasher by pressing the On/Off pushbutton.

When the wash programme has finished, it is recommended that the dishwasher is unplugged and the water tap turned off.

In general it is not advisable to open the door while the machine is working, especially during the hot phase of the washing programme; this could cause hot water to escape.

However, the dishwasher has a safety device that ensures, if the door is opened that the machine stops immediately.

Care must be taken if the door is opened immediately after a programme has finished, as steam may escape.

18

POS12UK

Page 18
Image 18
Zanussi ZT 6810 manual At the end of the washing programme