Zanussi ZYB 594 manual Pyro function symbol level 1 P 2 appears in the display, End of Cooking

To programme the pyrolytic cleaning cycle (delayed start, automatic stop)

If you desire, you can programme the starting and ending time of the pyrolytic cleaning cycle.

1.Press button to switch on the oven. Press

the button as often as necessary, until the

“Pyro“ function symbol (level 1 - P 2) appears in the display.

Simultaneously the “P I” writing and the

symbol will flash in the display and an acoustic signal will be emitted. This means that, before activating the pyrolytic cleaning function, you have to remove all the oven accessories.

2.The Cooking Duration symbol will flash

for some seconds; during this time push ' ' or '' buttons to select the pyrolytic 1 (P 1) or pyrolytic 2 (P 2) function.

3.Once you have chosen the desired pyrolytic function, the “P1” or "P2" writing will flash in the display, alternating with the symbol , waiting for confirmation to start the pyrolytic cleaning function.

At this time, push the time function button

(Fig. 22). The "End of Cooking"

symbol and the arrow symbol will flash. The control panel will display the end of the cleaning cycle (that is, the actual time + cooking duration time).

Push ' ' or '' buttons to select the required end of cycle time (Fig. 22).After a few seconds, the “Pyro” writing and the symbol will stop flashing, the acoustic signal will stop

while the Cooking Duration symbol will flash until the pyrolytic cleaning cycle start.

4.At the programmed time, the pyrolytic cleaning cycle will automatically start.

electrolux 31

5.When temperature inside the oven reaches 300°C, the door lock will be activated and the

related symbol will be displayed.

At the end of the pyrolytic cleaning process, the display shows the time of day. The oven door is locked.

Once the oven has cooled down, an acoustic signal will be emitted and the door will unlock.

To stop the pyrolytic cleaning cycle at any time,

press button .

Fig. 22

31