Installation 29

Installation Steps

Step 4: Create a Certificate

1.Create a directory named zebra_certs.

This directory may reside anywhere you choose (desktop, etc.).

2.From the Start menu, run cmd.exe as the administrator. Opens a DOS prompt.

3.Navigate to your zebra_certs directory.

Run the following commands from this directory:

a.Type: set RANDFILE=.rnd

b.On the command line, type openssl, and then press Enter.

4.Enter the following command and fill in the fields based on the information provided below:

a.Type: genrsa -outzserver.abccompanyinc.com.key 2048, and then press Enter.

where zserver.abccompanyinc.com = full DNS name of the server

Note • This command generates the key and is part of the security for the server communications. DO NOT give this information out to anyone.

b.Enter the following command and fill in the fields based on the information provided below:

req -new -subj

"/C=xx/ST=yyyyy/L=aaaaa/O=jjjjj/OU=rrrrrr/emailAddress=ss sss/CN=uuuuu" -key uuuuu.key -out uuuuu.csr

•where xx: two digit Country Code

•where yyyyy: State name where the server (or company) resides

•where aaaaa: City or town name

•where jjjjj: Organization or company name

•where rrrrrr: Organizational unit name

•where sssss: the contact email address for the certificate creator

•where uuuuu: full DNS name of the server

Note • The DNS name must match the DNS name supplied to the printer as the location URL as the Zebra AirWatch Connector.

Example • Listed below is an example of a complete certificate creation request.

req -new -subj "/C=US/ST=Illinois/L=Anytown/O=ABC Company Inc/OU=IT Team/emailAddress=John@abccompanyinc.com/CN=zserver.abcc ompanyinc.com" -key zserver.abccompanyinc.com.key -out zserver.abccompanyinc.com.csr

10/31/13

P1058563-003