Installation 33
Installation Steps
Step 6: Test a Printer
Request Settings from a Printer
In this section, you will test a printer to verify that the AirWatch console is able to request the current settings from the printer.
1.Turn on the printer.
2.Log into the AirWatch console, if necessary.
Note • Once you are logged in, the printer appears on your console after approximately 60 seconds. (See figure below.)
3.To see specific details about this printer, click on the Friendly Name of the printer.
The printer summary appears. If the printer settings appear on the screen, AirWatch is receiving settings from the printer.
10/31/13 |