88WebLink Set/Get/Do Commands weblink.restore_defaults
weblink.restore_defaults
Description This command defaults, and saves, the weblink branch settings. Any value, including an empty string, will default the weblink branch settings.
Note • The entire weblink branch of settings will be defaulted and the settings are saved; however, the weblink connections will not use the new settings until the printer is restarted (e.g. the weblink.printer_reset_required SGD will be "yes" after a default).
^JUF, ^JUS, ^JUN, ^JUA, and device.restore_defaults do not have any affect on this setting.
| Supported Devices | |
| • iMZ 220™, iMZ 320™ | |
| • | QLn220™, QLn320™, QLn420™ |
| • | ZT210™, ZT220™, ZT230™ |
| Type setvar, do | |
|
| |
Commands | Details | |
|
| |
setvar | This command defaults the weblink branch settings. | |
| Format: ! U1 setvar "weblink.restore_defaults" "value" | |
| Values: Any value, including an empty string, will default the branch | |
| Default: NA | |
|
| |
do | This command defaults the weblink branch settings. | |
| Format: ! U1 do "weblink.restore_defaults" "value" | |
| Values: Any value, including an empty string, will default the branch | |
| Default: NA | |
|
|
|
Example • These all default the branch:
!U1 setvar "weblink.restore_defaults" ""
!U1 setvar "weblink.restore_defaults" "foo"
!U1 do "weblink.restore_defaults" ""
!U1 do "weblink.restore_defaults" "foo"
10/31/13 |