Zebra Technologies PA/PT 400, PA/PT 403 manual 15

13.Push in the bottom of the media access door to close.

14.Turn on the printer or press the Feed button if the printer is al- ready on.

NOTES. To ensure optimal print quality, make sure that the backing material is flush against the peel bar (as shown in Figure 10). If it starts to “loop “ away from the peel bar, gently pull down on the backing material

With certain types of media, it may be necessary to reduce the print speed to 1.5 “ (38. 1mm) per second to produce consistent peel operation. Consult your authorized Zebra reseller for advice and information.

PA/PT400 & PA/PT 403 User’s Guide 15