correct communications port on the computer is selected. Next, verify that the same handshaking is in use by both the printer and the computer. Then, ensure that the communication parameters of the printer and the computer match. Refer to “Communicating with the Printer” in “Getting Ready to Print”.
Troubleshooting Tests
Printing a Configuration Label
To print out a listing of the printer’s current configuration (a sample is shown in Figure 28), refer to “Feed Button Modes” in this chapter.
Recalibration
Recalibrate the printer if it starts to display unusual symptoms, such as skipping labels. See “Calibration”.
Resetting the Factory Default Values
Resetting the printer to the factory defaults can solve some printer problems. Follow the instructions in ‘Feed Button Modes” in this chap- ter.
FIGURE 28 | FIGURE 29 |
36 | PA/PT400 & PA/PT 403 User’s Guide |