9.Swing up the media access door. Thread the fanfold media through the slot beneath the notch on the media access door (refer to Figure 12).
10.Swing open the media access door. Continue to insert the media into the printer and under the plastic media core until it appears beneath the print- head. Make sure the media is threaded under both media guides.
Notch
If you’re using direct | Fanfold | |
thermal media, con- | Media | |
Slot | ||
tinue on with step | ||
|
11.However, if you’re using thermal transfer media, you must also install a
ribbon cartridge. Proceed to “Loading the Ribbon ‘ in this chap- ter.
11.Swing up the media access door, ensuring that the media ex- tends over the tear bar (refer to Figure 13).
12.Lift to hook the
top of the media access door over the top cover.
13.Push in the bot- tom of the media access door to close.
14.Turn on the printer or press the Feed button if the printer is already on.
PA/PT400 & PA/PT 403 User’s Guide | 17 |