Zebra Technologies RW 220 Figure 3: Installing the Printer In The Vehicle Cradle, Printer Installation, Place the Printer over the Retaining Pins in the Cradle, Plug data, port

Figure 3: Installing the Printer In The Vehicle Cradle

Place the Printer over the Retaining Pins in the Cradle.

Rock the Printer into the Cradle to latch it in position.

Plug data
I/O cable into	Plug Charger out-
Communications
	put cable into
port
	Charger Jack

Caution: It is strongly recommended that as a safety precaution the adjustable shoulder strap be removed prior to docking the Printer. This precaution will ensure the strap will not interfere with proper operation of the vehicle.

Printer Installation

The RW 220 Printer can now be installed in the Vehicle Cradle:

1. Place the bottom of the printer over the two pins in the Cradle.

2.Rotate the Printer into the Cradle and press firmly until it latches in place.

3.If you are using a Zebra Mobile Charger:

•Plug the Charger’s output cable into the charger jack on the bottom of the printer.

10

RW 220 Vehicle Cradle Installation Guide