Mounting Arm the operator can easily load printing media, operate the printer’s controls and perform routine maintenance such as cleaning the printhead. Follow these steps:
1.Select a location in the vehicle that will avoid personal con- tact in case of an accident.
2.Turn the Cradle upside down and secure one of the mounting flanges from the movable Arm to the bottom of the Vehicle Cradle with the (4)
3.Secure the other mounting flange on the Movable Arm to the desired mounting surface. The accessory kit supplies a mounting plate with
Caution- Never use the RW 220 Vehicle cradle in conjunction with the mounting arm and the mounting plate in a vehicle without securely attaching it to the vehicle.
The mounting arm may also be directly mounted to a secure surface, such as in a vehicle. You may use the supplied
Installing a Mobile Charger
If you are using a Zebra RCLI series Charger to charge the print- er’s battery, use the supplied installation guide for instructions on correct connection to a power source and the printer.
Accessory Kit
The following table lists the RCLI series chargers which can be used with the RW 220 printer
DESCRIPTION | MOBILE CHARGER P/N | INPUT VOLTAGE | |
12 VDC | |||
|
|
| |
9 to 30 VDC | |||
|
|
| |
30 to 60 VDC | |||
|
|
| |
RCLI DC Mobile Charger 12 VDC |
|
| |
(w/ plug for cigarette lighter | 12 VDC | ||
socket) |
|
| |
|
|
| |
100 to 240 VAC; | |||
50/60 Hz | |||
|
| ||
|
|
|
Input Power Completion
Route the input power cable per the earlier section in this Guide: “Input Power Cable Completion.”
15
RW 220 Vehicle Cradle Installation Guide