Special Notices
The following notices emphasize certain information in the guide. Each serves a special purpose and is displayed in the format shown:
Note: Note is used to emphasize any significant information.
Caution: Indicates information that, if not followed, can result in damage to software, hardware, or data.
Caution: This warning symbol also indicates an imminently hazardous situation which, if not avoided will result in death or serious injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents
Vehicle Installation Safety
Caution: Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Caution: DO NOT OPERATE THE PRINTER WHILE DRIVING, as this may result in property damage or personal injury. Zebra Technologies Corp. does not promote the use of these products except when parked or stationary, and is not responsible for any loss resulting from the use or misuse of our prod- ucts. Most importantly, we do not want to see harm come to our customers or anyone else.
Caution: Do not install the Vehicle Cradle where the printer will be exposed to precipitation or excessive condensation.
Caution: Do not install the Vehicle Cradle on or near an airbag cover plate or within an airbag zone. Also, do not install the Vehicle Cradle in a location that will affect vehicle safety or drivability.
Caution: If you are using a Mobile Charger in conjunction with the Vehicle Cradle, the means of routing and securing the Power Input cable to the vehicle power source is extremely important. Hazards associated with improper wiring can be severe. To avoid unintentional contact between the wire and any sharp edges, provide the cable with proper bushings and clamping where it passes through openings. If the wire is subjected to sharp surfaces and excess engine vibration, the wiring harness insulation can wear away, causing a short between the bare wire and the chassis.
If you are using a Mobile Charger in conjunction with the Vehicle Cradle it is very important to ensure you make the correct cable to power source connections, because electrical energy from a vehicle’s power system can harm equipment and people.
Caution: If you are using a Mobile Charger in conjunction with the Vehicle Cradle, always refer to the installation guide provided with the charger for complete safety precautions and installation procedures.
4
RW 220 Vehicle Cradle Installation Guide