Introduction
Note: Zebra Technologies Corporation is not liable for personal injury or damage to any equipment caused by the improper installation of this equipment to any power source.
Caution- This equipment should be installed in accordance with this installation guide and under the supervision of properly trained and qualified personnel.
The RW 220 Vehicle Cradle allows use of the Zebra® RW 220 Receipt Printer in a vehicle. The Vehicle Cradle can be used in conjunction with a Zebra RCLI series charger module, which will use the vehicle’s battery as a power source to run and charge the RW 220 printer’s battery. Refer to the installation guide supplied with the charger for complete use and installation instructions and safety precautions.
An optional mounting arm provides the ability to locate the Printer and Vehicle Cradle in a variety of positions and mounting orientations to enhance its accessibility and ease of use.
The following instructions detail the installation and use of the RW 220 Vehicle Cradle. Following these instructions closely will ensure safe, reliable performance of the RW 220 Printer when installed in the Cradle.
The Printer runs off its own battery. If you are using this product in conjunction with a Zebra Mobile Charger, the charger module will only monitor and charge the printer’s battery.
The user should always refer to the RW Series Quick Start Guide supplied with the printer, or the RW Series Users Guide for complete information on using the Printer. The Users Guide is available
5
RW 220 Vehicle Cradle Installation Guide