Required for Installation
•An electrical drill, 1/4”(6 mm) drill bit•Common hand tools.

•#8-32 Screws or Bolts and appropriate mounting hardware for securing the Vehicle Cradle

Note: Use of appropriate hardware used to secure the Vehicle Cradle to the vehicle is the responsibility of the installer

References
•RW Series Quick Start Guide•RW Series User’s Guide•RCLI-DC Mobile Charger Installation Guide•RCLI-AC Charger Installation Guide

Note: Reference documents are available for download at www.zebra.com

Contents of the Package
•The RW 220 Vehicle Cradle Assembly. Two versions are of- fered:

p/n AK17463-018- Includes the RW 220 Cradle Assembly, a mounting arm, a base plate and mounting hardware.

p/n AK17463-019- Includes the RW 220 Vehicle Cradle only.•This Guide is included with both versions.

Installation

Introduction to Installation

The RW 220 Vehicle Cradle allows you to mount a RW 220 printer into virtually any vehicle.

This cradle does not supply power to the printer. A Zebra RCLI series Mobile Charger can be used in conjunction with the RW 220 Vehicle Cradle to supply intelligent charging using the vehicle’s electrical system.

One version of the RCLI Charger supplies an input power cable that can be plugged into an automotive vehicle’s cigarette lighter.

Caution: Under no circumstances should this equipment be attached directly to the vehicle’s battery without a proper fuse.

Since each situation or equipment type may pose unique require- ments, mounting hardware selection and mechanical installation shall be the responsibility of the installer. Zebra recommends using self-locking (ESN) nuts, bolts, and/or lock washers for installing the mount. The Cradle is secured with #8-32 mounting hardware (4 places).

Note: Hardware used to secure the Vehicle Cradle to the vehicle is not supplied in the installation kit.

continued on next page

7

RW 220 Vehicle Cradle Installation Guide