Zebra Technologies T300 Adjusting the Printhead Position, Figure 5. Adjusting the Printhead Position, Figure 4. Adjusting for Different Media Widths

Zebra 6300 Printer User’s Guide

Figure 4. Adjusting for Different Media Widths

Adjusting the Printhead Position

A set screw is located on top of the Printhead Carrier Assembly that can be adjusted to control print quality. This adjustment is set at the factory and will probably not need further adjusting. However, with different types and thicknesses of media, some adjustment may be necessary. To adjust the printhead position, refer to Figure 5. Turn the set screw until optimum print quality is obtained. Some trial and error may be necessary.

Figure 5. Adjusting the Printhead Position

￿%