Zebra 6300 Printer User’s Guide

Introduction

This manual provides all of the information you will need to operate your printer. To print labels, tags, or tickets with the Zebra T300 printer, refer to the instructions included with the software you are using to create the label.

Unpacking and Inspection

Save the carton and all packing materials in case shipping is ever required. Inspect the printer for possible damage incurred during shipment.

Reporting Damage

If you discover shipping damage upon inspection:

•Immediately notify the shipping company of the damage.

•Retain all packaging material for shipping company inspection.

•File a damage report with the shipping company and notify your local

distributor and Zebra Technologies Corporation of the damage.

Zebra Technologies Corporation is not responsible for any damage incurred during shipment of the equipment and will not repair this damage under war- ranty. Immediate notification of damage to the shipping company or its insuring agency will generally result in ensuring any damage claim validity and ultimate monetary compensation.

Additional Requirements

•Shielded data cable—serial or parallel, depending on which data com- munication method you prefer to use.

•Power cord—for 230 VAC operation only (120 VAC units come with a power cord).

•ZPL II Programming Guide, if you are going to use ZPL II to design label formats for the Zebra T300. To obtain a copy, mail or fax in the card at the back of this book.

￿