Zebra Technologies T300 Specifications

Zebra 6300 Printer User’s Guide

Specifications

Print density		203 dots/inch	8 dots/mm
Print width		1² to 4.125²	25.4 mm to 105.0 mm
Print speed		2²/sec, 1.5²/sec	51 mm/sec, 38 mm/sec
Label width (including back-		1² to 4.65²	25 mm to 118 mm
ing material, if any)
Label length		0.5² to 18²	13 mm to 457 mm
Interlabel gap		0.08² to 0.16²	2 mm to 4 mm
Label thickness (including		0.003² to 0.010²	0.076 mm to 0.254 mm
backing material, if any)
Label roll	Max. outer	4.0²	102 mm
size	diameter
	Min. inner core	1.0²	25.4 mm
	diameter
Registration	Horizontal	± 0.059²	± 1.5 mm
tolerance	Vertical	± 0.0393²	± 1.0 mm
First dot location (from outer		0.060² to 0.140²	1.5 mm to 3.5 mm
media edge)
Ribbon roll	Max. outer	1.5²	38 mm
size	diameter
	Min. inner core	0.50²	13.0 mm
	diameter
Physical size (L ´ W ´ H)		10.1² ´ 8.8² ´ 6.2²	257 mm ´ 224 mm ´ 158 mm
Weight (without media)		7 lb	3.18 kg
Tempera-	Operating	40° to 100° F	4° to 38° C
ture range	Storage	-4° to 140° F	-20° to 60° C
Relative humidity, operation			10 to 90% R.H.
and storage
Media requirements		Zebra recommends using Zebra-brand thermal transfer media
		that is outside-wound (the label or printing surface is wound on
		the outside of the backing). Media may be roll or fanfold,
		transmissive or reflective (black-mark) sensing; continuous,
		die-cut, or notched. Notched media: notch must be 1/4² wide ´
		3/32² long located on the left side of the label as viewed from
		the front of the printer. Black-mark media: marks must be
		located within 1 mm of the left edge of the media as viewed
		from the front of the printer; mark thickness: 0.12”-0.43” (3
		mm - 11 mm); mark width: 0.43” (11 mm) - full media width;
		mark-to-mark leading edge registration tolerance ±0.016”
		(±0.4 mm); mark density > 1.0 ODU (Optical Density Unit);
		maximum density of the back of the media on which the black
		mark is printed: 0.5 ODU.

"