Zenoah BC4310FW Set up

Set up

■ENGINE

•Using attached 4 bolts, secure the connection firmly with equal force. (F1)

(1) Bolt

■INSTALLING HANDLE

1. Loosen the 4 bolts on the handle bracket. (F2)

2. Insert the right handle (throttle lever is attached) and the left handle assembly into the

bracket and retighten the bolts securely. (F2)

(1) Handle bracket (2) Right handle (3) Bolt (4) Left handle (5) Engine side

■PROTECTOR

•Wrap the protector around the outer pipe as shown in the figure (F3).

(1) Protector

■SAFETY GUARD

•Attach the safety guard to the gear case and fix it with the clamp and 2 bolts (M5 x 25)

securely. (F4)

(1) Bolt (2) Clamp (3) Main pipe (4) Safety guard

■BLADE

1. Put the angled bar (F5-1) into the side holes of the inner holder (F5-4)and the

gearcase.

2. Remove the blade bolt (F5-2, Lefthanded) and the outer holder (F5-3) from the

gearshaft.

3. Put the blade onto the inner holder.

4. Put the outer holder onto the gearshaft making the recessed side face the blade.

5. Fasten the blade by the blade bolt with the washers (F5-5).

Tightening torque of blade bolt : 15~20 N·m (1.5~2.0 kg·m)

•Detailed attachments and set up method will be shown in separate Thai language