F1
F2
F3
English
6. Set up
■BLOWER TUBES
1.Connect the blower and swivel joint with flexible hose. Clamp both ends of the flexible hose securely with the hardware supplied with the unit.
2.Align the protrusion and the groove provided on the tube ends and twist the tube until connection is locked up.
NOTE
A light lubricant may be used to ease assembly of flexible pipe to blower elbow.
■THROTTLE LEVER
•Set up the clamp to the swivel and tighten the screw on the clamp.
(1)Clamp
(2)Swivel
(3)Screw
■THROTTLE CABLE
1.First, lightly tighten the hose in the middle of it by putting the band through the hole (a).
2.Next, lightly tighten the cable by putting the band through the hole (b).
(1)Hose
(2)Band
(3)Cable
22
