5. For safe operation
the other one’s presence and how to sign the danger etc.
d. Fix the cutting object if it is unfixed.
e. Never operate the engine without wheel guard.
f.Adjust the wheel guard to deflect sparks, dust, and material away from the operator and flammable materials.
g.Inspect the entire unit for loose fasteners and fuel leakage. Make sure that the blade is properly installed and securely fastened.
h.The product is equipped with a centrifugal clutch mechanism, so the wheel begins to rotate as soon as the engine is started when the throttle is in the start position. When starting the engine, place the unit on firm ground or other solid surface in an open area and hold it firmly in place so as to ensure that neither the wheel comes into contact with any obstacle when the engine starts.
i.Never attempt to
j.Be sure the wheel does not turn while the engine is idling. Adjust the carburetor if necessary.
■OPERATION SAFETY PRECAUTIONS
a. Grip the handles firmly with both hands. Place your feet slightly apart so that your weight is distributed evenly across both legs, and always be sure to maintain a steady, even posture while working.
b. Keep all parts of your body away from rotating wheel.
c. Never raise the engine speed above the maximum spindle speed (3000 1/min(rpm)).
d. If the unit start to shake or vibrate, turn off the engine and check the whole unit. Do not use it until the trouble has been properly corrected.
e. Keep the wheel always sharp. While using the unit, if the wheel won’t cut well caused by clogging, set the teeth of the saw by cutting concrete block, clayware or sandstone.
f.Avoid standing in a direct line with the cutting wheel.
g.Never force to push off the wheel on the cutting object.
h.Use only downward pressure on the saw, as lateral pressure may cause the blade to brake and shatter.
