9. Maintenance

MA2

0.6~0.7mm

MA3

IMPORTANT

Clogging of air filter reduces engine performances. Inside of an engine will quickly wear by dusts if an air cleaner cover is not correctly fitted or if a filter is missed, deformed, or damaged.

Avoid dusts to penetrate into the engine when removing the air filter. Cover an air inlet with a cloth after removing the filter.

To keep the engine performance, change the air filter at every 20 hours of operation.

SPARK PLUG

WARNING

Do not touch the spark plug by bare hands immediately after stopping the engine. There is a danger of burn for its high temperature.

About every 25 hours of operation, remove the spark plug and clean contaminant on electrodes with a wire brush, etc.

Applicable gap between the electrodes is 0.6~0.7mm.

Use specified spark plug for exchange.

Specified Spark Plug:

NGK BPM8Y

IMPORTANT

Electrodes of the spark plug are contaminated by over sucking of fuel or by poor quality oil. This may cause the engine start difficult.

FUEL FILTER

About every 25 hours of operation, remove a fuel filter from the fuel tank and remove adhered debris. In case the filter is clogged, exchange with a new one.

Care should be taken not to bend a fuel pipe when setting the filter back into the tank.

(1) Fuel filter

21

Page 21
Image 21
Zenoah HC510DV manual MA2, MA3, Spark Plug, NGK BPM8Y, Fuel Filter