10. Storage
WARNING
When discharging fuel, be careful not to spill fuel and completely wipe off if spilled. Also, securely close a cap of storage tank.
IMPORTANT
•In case the machine is left for long time, inside of the carburetor may be clogged and cause engine failure (starting failure or poor output power).
•During storage, make fuel tank cap loose. If it is tighten too much, cap packing may deform by temporal change.
1.Remove the dust hose and the dust bag from the body.
2.Open the dust bag fastener and remove internal dusts completely.
3.Remove debris and dirt on the machine body.
4.After discharging fuel from the fuel tank, start the engine and run until it stops.
5.Remove the spark plug and drop 1~2 cc of 2 cycle engine oil into the plug hole, then pull the starter rope for 2~3 times. After fitting the spark plug as original, pull the starter rope and stop at compression position.
6.Fully slack the tension of pulley drive belt.
7.Fully slack the tension of fan drive belt.
8.Dismount the cutter blade.
9.After applying appropriate cover on the machine, store it in an adequate place such as storage shelf, keeping moisture, dusts and children away.
